Product center
PRODUCTS
Halbrite No-Turn Tool
| The Halbrite No-Turn Tool patented cam-type slip was specifically designed to react to the torque loads created by a Progressive Cavity (PC) pump. The more torque the pump generates, the harder the slips bite, ensuring the pump remains stationary.
Reliable Operation and Release
The Halbrite No-Turn Tool’s slip releases when the torque is released. When set properly, in thousands of installations the Halbrite No-Turn Tool has never failed to release or let go while the pump is operating.
Designed for Economy and Stability
The slips and drag blocks of the series NS No-Turn Tool have been incorporated into a single component, making the tool less expensive to overhaul and re-run. The longer slip face provides greater stability for the pump once the tool is engages.
Setting and Release Procedure
1. Make up No-Turn Tool on bottom of stator.
2. Run in to desired setting depth.
3. Land dognut.
4. Raise tubing two feet (0.6 meters)
5. Raise tubing to right and hold torque in tubing. (No Turn-Tool sets with 1 ¼ turn to right at the tool).
6. Maintain torque, lower tubing two feet (0.6 meters). Further rotation to the right will be required to maintain proper torque on tubing.
7. Maintaining torque, raise tubing two feet (0.6 meters).
8. Repeat steps 6&7 tow to three times (there will an increased weight on weight indicator).0
9. Maintain torque, lower tubing and land dognut.
10. No-Turn Tool is set.
11. Working the torque down to the No-Turn Tool ensures a proper setting. All torque is trapped between the dognut and the No-Turn Tool, thus preventing movement in the tubing or pump.
To release the No-Turn Tool, release the torque.
|
 |