Specifications

1. Standard Dimensions: 44” L x 42”W x 98” H

2. Weight: 8040lbs without Gooseneck

3. Motors: Hydraulic Two Axial Piston, Variable Displacement 

4. Hydraulic System Requirement: 5000 psi

Performance

Pulling Force  

130,000 lbs @ 5 meters/min – 17ft/min

110,000lbs @ 10/meters/min -35ft/min

75,000lbs @ 20 meters/min-100ft/min

50,000lbs @ 40 meters/min-130ft/min

40,000lbs @ 50 meters/min – 165ft/min

38,000lbs@55 meters/min-180ft/min

Snubbing 

50,000 lbs Max Snubbing

The SDI 130K Injector can be fitted with gripper blocks for coil tubing sizes from 75” to 2.88” inclusively. For Coil Sizes 3.25 and 3.5” integral block carrier chains are required.

WEIGHT (lbs) DIM (WxLxH in) PULL (lbs@speed) SNUB (lb) HYDR PUMP REQ (psi) 8040 44x42x98 130K @ 5m/min – 17ft/min 50000 max 5000 8040 44x42x98 110K @ 10m/min – 35ft/min 50000 max 5000 8040 44x42x98 75K @ 20m/min – 100ft/min 50000 max 5000 8040 44x42x98 50K @ 40m/min – 130ft/min 50000 max 5000 8040 44x42x98 40K @ 50m/min – 165ft/min 50000 max 5000 8040 44x42x98 38K @ 55m/min – 180ft/min 50000 max 5000